Your all-in-one solution

Your trusted partner for HVAC design, installation, maintenance, and repair.

Committed to sustainability

Sustainability is at the heart of everything we do.

24/7/365 contracted call outs

Rapid response whenever you need us most.

Honesty and integrity

Building trust through transparent practices.

Haverhill

Client

Mixbrow

Duration

10 Months

Value

£190,000

Haverhill

Overview

This project involves the complete overhaul of the sanitary and water supply systems in a building, encompassing both new and existing areas. The primary focus is on the installation of new above-ground drainage systems, domestic water supply lines, and sanitary fixtures in the kitchens, cleaners’ areas, and toilet blocks.

Key Deliverables

Drainage System

  • Installation of new above-ground drainage pipes to serve the kitchens and cleaners’ area. 
  • Connection of the new drainage system to the existing infrastructure.
  • Installation of a commercial Saniflo pump. 

Water Supply

  • Extension of the existing boosted water supply from the ground floor unit to new outlets in the kitchens and cleaners’ area.
  • Connection of sinks to the water supply lines.
  • Insulation of all pipework.
  • Supply and installation of four under-sink unvented water heaters with safety kits. 

Sanitary Fixtures & Fittings 

  • Supply and installation of an Ideal Standard Cleaners sink with a bucket grid and taps.
  • Extension of hot and cold water supplies to the new sinks in the male toilets.
  • Installation of a 15mm isolated cold water supply adjacent future drainage connection.

Toilet Blocks

  • Isolation, disconnection, and removal of existing sanitary ware and hot water heaters in preparation for building alterations.
  • Modification of pipework to accommodate new layouts.
  • Installation of a Cistermiser sensorzone water controller with PIR to conserve water in toilet blocks.
  • Installation of flow restrictors at all outlets.
  • Supply and installation of sanitary fixtures, including toilet pans, concealed cisterns, flush plates, ambulant toilets, grab rails, TMVs, urinals, urinal cisterns, spreaders, urinal controls, and basin mixers.
  • Installation of a 30L Heatrae Multipoint Eco vertical unvented water heater in each toilet block.
  • Supply and installation of a 150L direct hot water cylinder with a Grundfos HW pump and thermal balancing valves.

Summary

This project will provide a comprehensive upgrade to the building’s sanitary and water supply systems, ensuring efficient operation, water conservation, and compliance with building regulations.  

Read More Contracting Case Studies: